Details

---

PERNUMA PERFOSET I/T, II/T
Text Perforating Machines.

for cancelling or marking forms, trade samples, labels, films or plastic cards, for securing original documents or for decorating letters by a company logo for example

The following models for manual operation are available:
PERNUMA PERFOSET I/T with a max. capacity of about 15 sheets of 70 g paper up to 7 letters. The desired text is fixed. The max. text length may be up to 78 mm and the max. text height up to 24 mm. The insertion depth is about 75 mm.
PERNUMA PERFOSET II/T with a max. capacity of about 25 sheets of 70 g paper up to 7 letters. The desired text is fixed. The max. text length may be up to 118 mm and the max. text height up to 32 mm. The insertion depth is about 110 mm. Up to 3 text lines fit in both models, depending on the character height. If you should work with permanent changing texts/terms the model.
PERNUMA PERFOSET II/TA is to be considered with a max. capacity of 25 sheets of 70 g paper as well up to 7 letters. Complete words are located on metal slides which can be exchanged easily and fast one against each other. The insertion depth is 110 mm. The machines are equipped with an adjustable side and rear gauge in general in order to facilitate an exact positioning of the perforation. The standard character heights are 6, 8 or 10 mm. All machines can be equipped with a safety lock preventing unauthorized persons from working with them.
Important:
When ordering a perforating machine please let us always know where on the forms the text should appear so that it appears legible.

---

---

PERNUMA OFFICE D
Electric Date Perforating Machine 

This machine is supplied with a complete set of figure slides consisting of 18 pieces in its standard version in order to be able to perforate a 6-digit date. These so-called slides are small metal sticks which can very fast and easily be inserted into/respectively pulled out of the machine from the front of it. Both models can contain 2 lines with a max. width of 80 mm each, for example a date and a fixed text above or below it or 2 lines of text. The standard character heights are 6, 8 or 10 mm. All perforating machines from our OFFICE series are equipped with an easy-to-exchange block-type-die-unit. The insertion depth is 42 mm. Up to 20 sheets of 70 g paper can be perforated in one operation depending on the number of digits. The insertion height is 2 mm. The perforation is effected by lateral fastened push-buttons. The main switch is at the rear of the machine. All OFFICE machines can be supplied with a foot switch or a safety lock. In case of order please always state where on the forms the impression is required so that it appears legible.

PERNUMA OFFICE T
Electric Text Perforating Machine

This machine is manufactured with a fixed text of your choice.



For more info please contact us.

Full catalog: